M:
M10:
M10N:	INDEXING SCHEME ASSOCIATED WITH SUBCLASS C10M RELATING TO LUBRICATING COMPOSITIONS
M10N10/00:	Metal present as such or in compounds
M10N10/02:	. Group 1
M10N10/04:	. Group 2
M10N10/06:	. Group 3
M10N10/08:	. Group 4
M10N10/10:	. Group 5
M10N10/12:	. Group 6
M10N10/14:	. Group 7
M10N10/16:	. Group 8
M10N20/00:	Specified physical properties of component of lubricating compositions
M10N20/02:	. Viscosity; Viscosity index
M10N20/04:	. Molecular weight; Molecular weight distribution
M10N20/06:	. Particles of special shape or size
M10N30/00:	Specified physical or chemical property which is improved by the additive characterising the lubricating composition, e.g. multifunctional additives
M10N30/02:	. Pour-point; Viscosity index
M10N30/04:	. Detergent or dispersant property
M10N30/06:	. Oiliness; Film-strength; Anti-wear; Resistance to extreme pressure
M10N30/08:	. Resistance to extreme temperature
M10N30/10:	. Inhibition of oxidation, e.g. anti-oxidants
M10N30/12:	. Inhibition of corrosion, e.g. anti-rust agents, anti-corrosives
M10N30/14:	. Metal deactivation
M10N30/16:	. Antiseptic; Biocidal
M10N30/18:	. Anti-foaming property
M10N30/20:	. Colour, e.g. dyes
M10N40/00:	Specified use or application for which the lubricating composition is intended
M10N40/02:	. Bearings
M10N40/04:	. Oil-bath; Gear-boxes; Automatic transmissions; Traction drives
M10N40/06:	. Instruments or other precision apparatus, e.g. damping fluids
M10N40/08:	. Hydraulic fluids, e.g. brake-fluids
M10N40/10:	. Running-in oil
M10N40/12:	. Gas-turbines
M10N40/13:	. . Aircraft turbines
M10N40/14:	. Electric or magnetic purposes
M10N40/16:	. . dielectric; Insulating oil
M10N40/18:	. . in connection with recordings on magnetic tape or disc
M10N40/20:	. Metal working
M10N40/22:	. . with essential removal of material, e.g. cutting; Cooling oil
M10N40/24:	. . without essential removal of material Oil for deformation operations, e.g. drawing, rolling
M10N40/25:	. Internal combustion engines
M10N40/26:	. . Two-stroke
M10N40/28:	. . Rotary
M10N40/30:	. Refrigerator lubricant
M10N40/32:	. Wire, rope or cable lubricants
M10N40/34:	. Lubricating-sealants
M10N40/36:	. Release agents
M10N50/00:	Form in which the lubricant is applied to the material being lubricated
M10N50/02:	. dissolved or suspended in a carrier which subsequently evaporates to leave a lubricant coating
M10N50/04:	. Aerosol
M10N50/06:	. Gaseous phase, at least during working conditions
M10N50/08:	. solid
M10N50/10:	. semi-solids; greasy
M10N60/00:	Chemical after-treatment of the constituents of the lubricating composition
M10N60/00B:	. by organic hydroxy group containing compounds
M10N60/00E:	. by nitrogen containing compounds
M10N60/02:	. Reduction, e.g. hydrogenation
M10N60/04:	. Oxidation, e.g. ozonisation
M10N60/06:	. by epoxides
M10N60/08:	. Halogenation
M10N60/10:	. by sulfur or a compound containing sulfur
M10N60/12:	. by phosphorus or a compound containing phosphorus, e.g. PxSy
M10N60/14:	. by boron or a compound containing boron
M10N70/00:	Special methods of preparation
M10N80/00:	Special pretreatment of the material to be lubricated, e.g. phosphatising or chromatising of a metal
M10N210/00:	Nature of the metal present as such or in compounds, i.e. in salts
M10N210/01:	. Group I, e.g. Li, Na, K, Cs, Cu, Ag, Au
M10N210/02:	. Group II, e.g. Mg, Ca, Ba, Zn, Cd, Hg
M10N210/03:	. Group III, e.g. Al, In, La
M10N210/04:	. Group IV, e.g. Sn, Pb, Ti, Zr
M10N210/05:	. Group V, e.g. V, As, Sb, Bi
M10N210/06:	. Group VI, e.g. Cr, Mo, W
M10N210/07:	. Group VII or VIII
M10N210/08:	. . Mn, Fe, Co, Ni
M10N220/00:	Specified physical or chemical properties or characteristics, i.e. function,
M10N220/02:	. Physico-chemical properties
M10N220/021:	. . Molecular weight
M10N220/022:	. . Viscosity
M10N220/023:	. . Cloud point
M10N220/024:	. . Iodine value
M10N220/025:	. . Saturated compounds
M10N220/026:	. . Unsaturated compounds
M10N220/027:	. . Linear chain compounds
M10N220/028:	. . Branched chain compounds
M10N220/029:	. . Star-shaped polymers
M10N220/030:	. . Dendrimers
M10N220/031:	. . Distillation range
M10N220/032:	. . Specific gravity or density
M10N220/033:	. . Shear stability
M10N220/04:	. . Ionic liquids
M10N220/06:	. . Liquid crystals
M10N220/08:	. . Particles related characteristics
M10N220/082:	. . . Particle size or shape
M10N220/084:	. . . Coated particles
M10N220/086:	. . . Fibrous forms
M10N220/10:	. . Biodegradable compounds
M10N220/12:	. . Volatile compounds
M10N220/13:	. . Non-volatile compounds
M10N220/14:	. Characteristics associated with water
M10N220/142:	. . Water solubility
M10N220/144:	. . Onsolubility in water
M10N220/146:	. . Crystal water containing compounds
M10N220/30:	. . Refrigerants
M10N220/301:	. . . Chlorofluorocarbons
M10N220/302:	. . . Hydrofluorocarbons
M10N220/303:	. . . Hydrocarbons
M10N220/304:	. . . Nitrogen
M10N220/305:	. . . Ammonia
M10N220/306:	. . . Carbon dioxide
M10N230/00:	Specified physical or chemical
M10N230/02:	. Viscosity or viscosity index
M10N230/04:	. Detergent properties, e.g. for cleaning, inhibition or removing varnish; Dispersion properties, e.g. for dispersing solids, carbon residues, sludge
M10N230/041:	. . Soot induced viscosity control
M10N230/06:	. Resistance to extreme pressure; Oiliness; Abrasion resistance; Friction; Anti-wear
M10N230/08:	. Resistance to extreme heat; Resistance to extreme temperature
M10N230/10:	. Anti-oxidation characteristics
M10N230/12:	. Resistance to rust or corrosion
M10N230/14:	. Metal deactivation, i.e. passivation
M10N230/16:	. Bactericidal or (micro)biocidal
M10N230/18:	. Defoaming properties
M10N230/20:	. Colour
M10N230/22:	. Degreasing properties
M10N230/24:	. Emulsion properties
M10N230/26:	. Waterproofing or water-resistance
M10N230/28:	. Anti-static
M10N230/30:	. Anti-misting
M10N230/32:	. Light or X-ray resistance
M10N230/34:	. Fragrance or deodorising properties
M10N230/36:	. Seal compatibility, e.g. with rubber
M10N230/38:	. Catalyst protection, e.g. in exhaust gas converters
M10N230/40:	. Low content or no content compositions
M10N230/41:	. . Chlorine free or low chlorine content compositions
M10N230/42:	. . Phosphor free or low phosphor content compositions
M10N230/43:	. . Sulfur free or low sulfur content compositions
M10N230/44:	. . Boron free or low contentn boron compositions
M10N230/45:	. . Ashless or low ash content
M10N230/50:	. Emission or smoke controlling properties
M10N230/52:	. Base number (TBN)
M10N230/54:	. Fuel economy
M10N230/56:	. Boundary lubrication or thin film lubrication
M10N230/58:	. Elastohydrodynamic lubrication, e.g. for high compressibility layers
M10N230/60:	. Electro rheological properties
M10N230/62:	. Food grade properties
M10N230/64:	. Environmental friendly compositions
M10N230/66:	. Hydrolytic stability
M10N230/68:	. Shear stability
M10N230/70:	. Soluble oils
M10N230/72:	. Extended drain
M10N230/74:	. Noack Volatility
M10N230/76:	. Reduction of noise, shudder or vibrations
M10N230/78:	. Fuel contamination
M10N240/00:	Specified uses or applications of lubricating compositions
M10N240/02:	. Bearings
M10N240/04:	. Gear oil
M10N240/042:	. . for automatic transmissions
M10N240/044:	. . for manual transmissions
M10N240/045:	. . for Continuous Variable Transmission (CVT)
M10N240/046:	. . for traction drives
M10N240/06:	. Precision machinery, instruments
M10N240/08:	. Hydraulic fluids, e.g. for brakes, clutches
M10N240/10:	. Internal-combustion engines
M10N240/101:	. . Alcohol fuelled engines
M10N240/102:	. . Diesel engines
M10N240/103:	. . . Small diesel engines
M10N240/104:	. . Gasoline engines
M10N240/105:	. . . Two-cycle engines
M10N240/106:	. . . Rotary engines
M10N240/108:	. . for running in; grinding
M10N240/12:	. Gas turbines
M10N240/121:	. . Aircraft turbines
M10N240/14:	. Steam engines or turbines
M10N240/20:	. Electrical or magnetic applications
M10N240/201:	. . Dielectrics or insulators
M10N240/202:	. . for electric contacts
M10N240/203:	. . Pantographs, i.e. printing devices
M10N240/204:	. . Magnetic recording mediums
M10N240/205:	. . Magnetic fluids
M10N240/22:	. Lubricating sealants
M10N240/30:	. Refrigerators; Compressors
M10N240/40:	. Metal working
M10N240/401:	. . with removal of material, e.g. cutting, grinding, drilling
M10N240/402:	. . without removal of material, e.g. forming, gorging, drawing, pressing, stamping, rolling, extruding
M10N240/403:	. . Manufacturing joint less pipes
M10N240/404:	. . Hot working
M10N240/405:	. . Cold working
M10N240/406:	. . of specific metals
M10N240/407:	. . . Soft metals, e.g. aluminium
M10N240/408:	. . . Iron or steel
M10N240/409:	. . . stainless steel
M10N240/50:	. Wires, ropes or cables
M10N240/52:	. Conveyors; Chain belts
M10N240/54:	. Generators or electric motors in oil or gas winning field
M10N240/56:	. Flashing oils; Marking oils
M10N240/58:	. Mould release agents
M10N240/60:	. Supervacuum or supercritical use
M10N240/62:	. Textile oils
M10N240/64:	. Slushing oils
M10N240/66:	. Medical uses
M10N250/00:	Form or state of lubricant compositions in which they are used
M10N250/02:	. Emulsions; Colloids; Micelles
M10N250/021:	. . Oil-in-water
M10N250/022:	. . Water-in-oil
M10N250/04:	. Aerosols
M10N250/06:	. Gaseous form
M10N250/08:	. Solids
M10N250/10:	. Semi-solids or greases
M10N250/12:	. Dispersions of solid lubricants
M10N250/121:	. . compositions providing a coating after evaportion of a medium, e.g. of solvent, water
M10N250/14:	. Multi layer lubricant coatings
M10N250/141:	. . in the form of films or sheets
M10N250/16:	. Micro capsules
M10N250/18:	. Composite materials, or sliding materials in which lubricants are integrally moulded
M10N260/00:	Chemical after-treatment or modifications of compounds
M10N260/02:	. Reduction
M10N260/04:	. Oxidation
M10N260/06:	. Treatment with epoxides or oxyalkylation reactions
M10N260/08:	. Halogenation
M10N260/09:	. Treatment with nitrogen containing compounds
M10N260/10:	. Treatment with sulfur or sulfur-containing compounds
M10N260/12:	. Treatment with phosphorus or phospohorus-containing compounds
M10N260/14:	. Treatment with boron or boron-containing compounds
M10N270/00:	Specific manufacturing methods for lubricant compositions or compounds not covered by groups M10N210/00 to M10M260/00
M10N270/02:	. concentrating of additives
M10N280/00:	Specific pretreatment of the surface to be lubricated, e.g. phosphatising